Subject Code:55003 L:4 T/P/D:1 Credits:4 Int. Marks:25 Ext. Marks:75 Total Marks:100
Design & Reinforced Concrete Structures Syllabus
Subject Code:55002 L:3 T/P/D:2 Credits:4 Int. Marks:25 Ext. Marks:75 Total Marks:100
Concrete Technology Syllabus
Subject Code:55001 L:3 T/P/D:1 Credits:3 Int. Marks:25 Ext. Marks:75 Total Marks:100
UNIT I: CEMENT:
Portland cement- chemical composition^Hydration, Setting of cement - Structure of hydrate cement - Test on physical properties -Different grades of cement.
UNIT II: ADMIXTURES:
Types of admixtures - mineral and chemical admixtures -properties - dosages - effects - usage.
UNIT III: AGGREGATES:
Classification of aggregate - Particle shape & texture -Bond, strength & other mechanical properties of aggregate - Specific gravity, Bulk density, porosity, adsorption & moisture content of aggregate - Bulking of sand - Deleterious substance in aggregate - Soundness of aggregate -Alkali aggregate reaction - Thermal properties - Sieve analysis - Fineness modulus - Grading curves - Grading of fine & coarse Aggregates - Gap graded aggregate — Maximum aggregate size.
UNIT IV: FRESH CONCRETE:
Workability - Factors affecting workability -Measurement of workability by different tests - Setting times of concrete -Effect of time and temperature on workability - Segregation & bleeding -Mixing and vibration of concrete - Steps in manufacture of concrete -Quality of mixing water.
UNIT V: HARDENED CONCRETE:
Water / Cement ratio - Abram's Law - Gelspaoe ratio - Nature of strength of concrete - Maturity concept - Strength in tension & compression - Factors affecting strejngth - Relation between compression & tensile strength - Curing.
UNIT VI: TESTING OF HARDENED CONCRETE:
Compression tests - Tensioft.tgsts - Factors affecting strength - Flexure tests - Splitting tests - Pull-odt rest, Non-destructive testing methods - codal provisions for NDT.
ELASTICITY, CREEP & SHRINKAGE - Modulus of elasticity - Dynamic modulus of elasticity - Posisson's ratio - Creep of concrete - Factors influencing creep - Relation between creep & time - Nature of creep -Effects of creep - Shrinkage - types of shrinkage.
UNIT VII: MIX DESIGN :
Factors in the choice of mix proportions - Durability of concrete - Quality Control of concrete - Statistical methods - Acceptance criteria -Proportioning of concrete mixes by various methods - BIS method of mix design.
UNIT VIII: SPECIAL CONCRETES:
Light weight aggregates - Light weight aggregate concrete - Cellular concrete - No-fipes concrete - High density concrete -Fibre reinforced concrete - Polymer concrete - Types of Polymer concrete - High performance concrete - Self compacting concrete.
TEXT BOOKS:
1. Properties of Concrete by A.M.Neville - Low priced Edition - 4th edition
2. Concrete Technology by M.S.Shetty. - S.Chand & Co.; 2004
Civil Engineering Regulation:9 Year:2 Semester:1 Subjects
Subject Name | L | T/P/D | C |
4 | 1 | 4 | |
4 | 1 | 4 | |
3 | 1 | 3 | |
3 | 1 | 3 | |
3 | 1 | 3 | |
4 | 0 | 4 | |
3 | 2 | ||
3 | 2 |
Stength of Materials Lab Syllabus
Subject Code:53601 L:0 T/P/D:3 Credits:2 Int. Marks:25 Ext. Marks:50 Total Marks:75
List of Experiments:
1. Tension test
2. Bending test on (Steel / Wood) Cantilever beam.
3. Bending test on simple support beam.
4. Torsion test
5. Hardness test
6. Spring test
7. Compression test on wood or concrete
8. Impact test
9. Shear test
10. Verification of Maxwell’s Reciprocal theorem on beams.
11. Use of electrical resistance strain gauges
12. Continuous beam deflection test.
List of Major Equipment:
1. UTM for conducting tension test on rods
2. Steel beam for flexure test
3. Wooden beam for flexure test
4. Torsion testing machine
5. Brinnell’s / Rock well’s hardness testing machine
6. Setup for spring tests
7. Compression testing machine
8. Izod Impact machine
9. Shear testing machine
10. Beam setup for Maxwell’s theorem verification.
Surveying Lab-I Syllabus
Subject Code:53600 L:0 T/P/D:3 Credits:2 Int. Marks:25 Ext. Marks:50 Total Marks:75
List of Experiments:
1. Survey of an area by chain survey (closed traverse) & Plotting
2. Chaining across obstacles
3. Determination of distance between two inaccessible points with compass.
4. Surveying of a given area by prismatic compass (closed traverse) and plotting after adjustment.
5. Radiation method, intersection methods by plane Table survey
6. Two point and three point problems in plane table survey
7. Traversing by plane table survey
8. Fly leveling (differential leveling)
9. An exercise of L.S and C.S and plotting
10. Two exercises on contouring.
List of Major Equipment:
1. Chains, tapes, Ranging rods, cross staff, arrows
2. Compasses and Tripods, Optical square.
3. Plane tables, Alidade, Plumbing fork, trough compasses
4. Leveling instruments and leveling staves
5. Box sextants, planimeter.
Fluid Mechanics Syllabus
Subject Code:53005 L:3 T/P/D:1 Credits:3 Int. Marks:25 Ext. Marks:75 Total Marks:100
UNIT I: INTRODUCTION :
Dimensions and units � Physical properties of fluids specific gravity, viscosity, surface tension, vapor pressure and their influences on fluid motionpressure at a point, Pascal�s law, Hydrostatic law - atmospheric, gauge and vacuum pressure- measurement of pressure. Pressure gauges, Manometers: differential and Micro Manometers.
UNIT II: II
Hydrostatic forces on submerged plane, Horizontal, Vertical, inclined and curved surfaces � Center of pressure. Derivations and problems.
UNIT III: FLUID KINEMATICS :
Description of fluid flow, Stream line, path line and streak lines and stream tube. Classification of flows : Steady, unsteady, uniform, nonuniform, laminar, turbulent, rotational and irrotational flows � Equation of continuity for one, two , three dimensional flows � stream and velocity potential functions, flownet analysis.
UNIT IV: FLUID DYNAMICS :
Surface and body forces � Euler�s and Bernoulli�s equations for flow along a stream line for 3-D flow, (Navier � stokes equations (Explanationary) Momentum equation and its application � forces on pipe bend.
UNIT V: Boundary layer Theory:
Approximate Solutions of Navier Stoke�s Equations � Boundary layer � concepts, Prandtl contribution, Characteristics of boundary layer along a thin flat plate, Vonkarmen momentum integral equation, laminar and turbulent Boundary layers no deviations BL in transition, separation of BL, control of BL, flow around submerged objects-Drag and Lift- Magnus effect.
UNIT VI: LAMINAR & TURBULENT FLOWS:
Reynold�s experiment � Characteristics of Laminar & Turbulent flows. Flow between parallel plates, Flow through long tubes, flow through inclined tubes.
UNIT VII: CLOSED CONDUIT FLOW:
Laws of Fluid friction � Darcy�s equation, Minor losses � pipes in series � pipes in parallel � Total energy line and hydraulic gradient line. Pipe network problems, variation of friction factor with Reynold�s number � Moody�s Chart.
UNIT VIII: MEASUREMENT OF FLOW :
Pitot tube, Venturi meter and orifice meter � classification of orifices, flow over rectangular, triangular and trapezoidal and Stepped notches - �Broad crested weirs.
TEXT BOOKS:
1. Fluid Mechanics by Modi and Seth, Standard book house.
2. Introduction to Fluid Machines by S.K.Som & G.Biswas (Tata Mc.Grawhill publishers Pvt. Ltd.)
3. Introduction to Fluid Machines by Edward J. Shaughnessy, Jr, Ira M. Katz and James P. Schaffer , Oxford University Press, New Delhi
REFERENCE BOOKS:
1. Fluid Mechanics by J.F.Douglas, J.M. Gaserek and J.A.Swaffirld (Longman)
2. Fluid Mechanics by Frank.M. White (Tata Mc.Grawhill Pvt. Ltd.)
3. Fluid Mehanics by A.K. Mohanty, Prentice Hall of India Pvt. Ltd., New Delhi
4. A text of Fluid mechanics and hydraulic machines by Dr. R.K. Bansal - Laxmi Publications (P) ltd., New Delhi
Subscribe to:
Posts (Atom)